MOXA MGate 5118 Series
1-port CAN-J1939 to Modbus / PROFINET / EtherNet / IP gateways
- Key-in-free J1939 command auto detection
- Built-in J1939 traffic monitoring/diagnostics/live-list tools
- Supports J1939 to Modbus RTU/ASCII/TCP, EtherNet/IP, PROFINET protocol conversion
- Ready for hazardous locations: C1D2, ATEX, IECEx
- MicroSD card for configuration backup/duplication, and event log
- 2 kV CANbus and Modbus serial port isolation
- -40 to 75°C wide operating temperature models available
- IEC 62443-4-2 compliant
The MGate 5118 series industrial protocol gateways support the SAE J1939 protocol, which is based on CANBus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy duty truck industry and backup power systems. It is now common to use an engine control unit (ECU) to control these kinds of devices, and more and more applications are using PLCs for process automation to monitor the status of J1939 devices connected behind the ECU.
The MGate 5118 series gateways support the Modbus RTU/ASCII/ TCP, EtherNet/IP, and PROFINET protocols to support most PLC applications. Devices that support the J1939 protocol can be monitored and controlled by PLCs and SCADA systems that use the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols. With the MGate 5118, you can use the same gateway in a variety of PLC environments
The MGate 5118 series gateways support the Modbus RTU/ASCII/ TCP, EtherNet/IP, and PROFINET protocols to support most PLC applications. Devices that support the J1939 protocol can be monitored and controlled by PLCs and SCADA systems that use the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols. With the MGate 5118, you can use the same gateway in a variety of PLC environments
Industrial Protocols
- Protocols
- J1939 to Modbus RTU/ASCII (Master/Slave)
- J1939 to Modbus TCP (Client/Server)
- J1939 to EtherNet/IP (Scanner/Adapter)
- J1939 to PROFINET (I/O Device)
SAE J1939, Modbus RTU/ASCII/TCP, PROFINET, EtherNet/IP
Protocol Conversion
Ethernet Interface
- Protocols
Modbus TCP (Client/Server), PROFINET (I/O device), EtherNet/IP (Scanner/Adapter)
Number of Ports
2 (1 IP address, supports Ethernet cascading)
Speed
10/100 Mbps, Auto MDI/MDIX
Connector
8-pin RJ45
Magnetic Isolation Protection
1.5 kV (built-in)
CAN-J1939 Serial Interface
- Protocols
SAE J1939
Number of Ports
1
Connectors
6-pin terminal block
Terminator
120 Ù
Isolation
2 kv (built-in)
Data Rate
250 kbps and 500 kbps
Modbus Serial Interface
- Protocols
Modbus RTU/ASCII (Master/Slave)
Number of Ports
1
Serial Standards
RS-232/422/485, software selectable
Connectors
DB9 male
Pull High/Low Resistor for RS-485
1 kÙ, 150 kÙ
Terminator for RS-485
120 Ù
Isolation
2 kV (built-in)
Modbus Serial Communication Parameters
- Data Bits
8
Stop Bits
1, 2
Parity
None, Even, Odd, Space, Mark
Flow Control
RTS/CTS, RTS Toggle
Baudrate
50 bps to 921.6 kbps
Modbus Serial Signals
- RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422
Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w
Data+, Data-, GND
Software
- Configuration Options
Web console
Utility
Device Search Utility (DSU) for Windows 95, 98, ME, NT, 2000, Windows XP, Server 2003, Vista, Server 2008 (x86/x64), Windows Server 2008 R2, Windows 7/8/8.1/10 (x86/x64), Windows Server 2012 (x64), Windows 2012 R2
Network Protocols
TCP/IP, UDP, HTTP, SMTP, NTP, DNS, DHCP Client, SNMP (v1, v2, v3), MIB-II, ARP, Telnet
Support
MXview, MXconfig, IEC 62443-4-2
Physical Characteristics
- Housing
Metal, IP30
Weight
589 g (1.30 lb)
Dimensions
45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in)
Environmental Limits
- Operating Temperature
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models:
-40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Vibration
IEC 60068-2-6, IEC 60068-2-64
Shock
IEC 60068-2-27
Drop
IEC 60068-2-32
Power Requirements
- Input Voltage
- 416 mA @ 12 VDC
- 195 mA @ 24 VDC;
- 110 mA @ 48 VDC
12 to 48 VDC
Input Current
Power Connector
Terminal block
Standards and Certifications
- Safety
EN 60950-1(LVD), UL 61010-2-201
Hazardous Location
Class I Division 2, ATEX, IECEx
(Note: Certification is underway. Please contact us for details.)
EMC
EN 61000-6-2/6-4
EMI
CISPR 22, FCC Part 15B Class B
EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power 1 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF: 10 A/m
Reliability
- Alarm Functions
Relay, email, SNMP trap
Alert Tools
Built-in buzzer
Storage Card Slot
1 microSD (SDHC) card slot; supports up to 32 GB
MTBF (mean time between failures)
- Time
727,873 hrs
Standard
Telcordia SR332
Available Models
- MGate 5118
- 1-port J1939 to Modbus/PROFINET/EtherNet/IP gateway, 0 to 60°C operating temperature
MGate 5118-T
- 1-port J1939 to Modbus/PROFINET/EtherNet/IP gateway, -40 to 75°C operating temperature
Optional Accessories
- Wireless AP Mounting Kit
- WK-51-01
- Wall-mounting kit, 51mm wide
Connectors
- Mini DB9F-to-TB
- DB9 Female to Terminal Block connector
Kunden, die diesen Artikel gesehen haben, sahen auch