Perle UNO-PS /1AC/5DC/25W Single-Phase DIN Rail Power Supply
5V Industrial Power Supply, AC to DC Converter
- 5V DC Output Voltage
- 5 Amps
- 25 Watts
- Single phase AC Input
- Input Voltage Range: 85 ... 264 V AC
UNO-PS/1AC/5DC/25W Ein-Phasiges Schaltnetzteil ist ein robuster AC zu DC-Wandler, der die hohen Stabilitäts- und Effizienzerwartungen der Bereiche Industrie, Maschinenautomation und Prozesskontrolle erfüllen. Diese Schaltnetzteile (SNT) sorgen für eine regulierte Ausgangsspannung, selbst wenn es im Stromnetz zu Spannungsschwankungen kommen sollte. UNO Stromversorgungen verfügen über alle zur Unterstützung von ITE (informationstechnische Geräte) erforderlichen Sicherheitszertifikate, robuste Verpackung, erweiterte Betriebstemperaturbereiche, hohe Spitzenlasten und hohe Isolationsspannungen und können dadurch die Anforderungen Ihrer industriellen Anwendung erfüllen.
Durch die NEC-Bezeichnung als eine Klasse-2-Stromversorgung werden alle Bestimmungen, die die Verdrahtung (Leitungsquerschnitt und Kabelisolierung, Draht-Derating-Faktoren, Überstromschutzgrenzen und Methoden der Elektroinstallation) zwischen dem Ausgang des Speisegeräts und dem Eingang der Last betreffen, von der UNO-PS/AC erfüllt. Die Ausgangsspannungs- und Leistungsentfaltungsfähigkeiten dieser Stromversorgung der Klasse 2 verringern das Risiko für Brandeinleitungen und Stromschlägen. Dadurch können bei der Installation von elektrischen Anlagen günstigere Verdrahtungsmethoden eingesetzt werden.
Industrielle Betriebstemperatur von -25°C bis +70°C
Geräte in den Bereichen Verkehrsmanagement, Öl- und Gaspipelines, Wetterverfolgung, industrielle und Outdoor-Anwendungen müssen bei Temperaturen funktionsfähig bleiben, die von kommerziellen Stromversorgungen nicht getragen werden. Bei einer Betriebstemperatur von -25°C bis +70°C sind UNO Sschaltnetzteile ideal für Geräte, die rauen Umgebungen und extremen Temperaturen ausgesetzt sind.
Hohe Effizienz bis 86% und niedrige Leistungsaufnahme bei Nulllast <0.3W
Im Vergleich zu anderen Produkten auf dem Markt bietet die UNO Stromversorgungen hervorragende Energieeinsparungen. Dank der sehr niedrigen Leistungsaufnahme bei Nulllast (unter 0,3 W) und über 86% Effizienz bei Nennlast wird nur eine geringe Menge an elektrischer Energie in unerwünschte Wärmeenergie umgewandelt, wodurch diese Stromversorgung besonders umweltfreundlich ist.
Ideale Anwendungsumgebungen für UNO-PS/1AC/5DC/25W 1-Phasiges Schaltnetzteil für Hutschienenmontage:
- Automatisierter Produktionsablauf
- Industriesteuerung, Automatisierung, Montage und Prüfgeräte
- Baukontrolle, Sicherheit und Überwachung und Klimaanlagen
- Stromversorgung von vielen Industrieautomatisierungsgeräten wie Sensoren, Controllern und Ventilen
Weitere Gründe sich für UNO-PS/1AC/5DC/25W Ein-Phasige Stromversorgungen zu entscheiden:
- Schmaler Hutschienen-Gehäusesteg mit Breite von 22.5 mm
- Spannungsisolierung Eingang/Ausgang: 4 kV-AC
- LED-Anzeige für Spannungsausfall: Wenn die Ausgangsspannung unter dem Betriebsbereich liegt, schaltet die LED-Leuchte sich aus
- Schutzvorkehrungen: Kurzschluss, Überlast, Überspannung, Übertemperatur
- Hohe MTBF (mittlerer Ausfallabstand)-Werte gewährleisten maximale Verfügbarkeit
- IEC-Schutzklasse II Stromversorgungen
Environmental Product Compliance | |
---|---|
REACH SVHC | Lead 7439-92-1 |
China RoHS | Environmentally Friendly Use Period = 25; |
General | |
Net weight | 0.15 kg |
Efficiency | typ. 85 % (120 V AC) |
typ. 86 % (230 V AC) | |
Insulation voltage input/output | 4 kV AC (type test) |
3 kV AC (routine test) | |
Protection class | II (in closed control cabinet) |
Degree of protection | IP20 |
MTBF (IEC 61709, SN 29500) | 2174159 h (40 °C) |
Mounting position | horizontal DIN rail NS 35, EN 60715 |
Assembly instructions | alignable: 0 mm horizontally, 30 mm vertically |
Standards and Regulations | |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Noise immunity | EN 61000-6-2:2005 |
Connection in acc. with standard | CUL |
Standards/regulations | EN 61000-4-2 |
Contact discharge | 4 kV (Test Level 2) |
Standards/regulations | EN 61000-4-3 |
Frequency range | 80 MHz ... 1 GHz |
Test field strength | 10 V/m |
Frequency range | 1.4 GHz ... 2 GHz |
Test field strength | 3 V/m |
Standards/regulations | EN 61000-4-4 |
Comments | Criterion B |
Standards/regulations | EN 61000-6-3 |
EN 61000-4-6 | |
Frequency range | 10 kHz ... 80 MHz |
Voltage | 10 V (Test Level 3) |
Standards/regulations | EN 61000-4-11 |
Low Voltage Directive | Conformance with LV directive 2006/95/EC |
Standard - Safety of transformers | EN 61558-2-16 |
Standard - Electrical safety | IEC 60950-1/VDE 0805 (SELV) |
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations | EN 50178/VDE 0160 (PELV) |
Standard – Safety extra-low voltage | IEC 60950-1 (SELV) and EN 60204-1 (PELV) |
Standard - Safe isolation | DIN VDE 0100-410 |
Standard – Limitation of mains harmonic currents | EN 61000-3-2 |
UL approvals | UL/C-UL listed UL 508 |
UL/C-UL Recognized UL 60950-1 | |
UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location) | |
Shock | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (operation) | < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
15 Hz ... 150 Hz, 2.3g, 90 min. | |
Approval - requirement of the semiconductor industry with regard to mains voltage dips | EN 61000-4-11 |
Information technology equipment - safety (CB scheme) | CB Scheme |
Connection data, input | |
Connection method | Screw connection |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Stripping length | 8 mm |
Screw thread | M3 |
Output data | |
Nominal output voltage | 5 V DC ±1 % |
Nominal output current (IN) | 5 A (-25 °C ... 55 °C) |
Derating | 55 °C ... 70 °C (2.5%/K) |
Connection in parallel | Yes, for redundancy and increased capacity |
Connection in series | yes |
Feedback resistance | < 10 V DC |
Protection against surge voltage on the output | ≤ 10 V DC |
Control deviation | < 1 % (change in load, static 10 % ... 90 %) |
< 3 % (Dynamic load change 10 % ... 90 %, 10 Hz) | |
< 0.1 % (change in input voltage ±10 %) | |
Residual ripple | < 40 mVPP (with nominal values) |
Output power | 25 W |
Typical response time | < 1 s |
Maximum power dissipation in no-load condition | < 0.3 W |
Power loss nominal load max. | < 4.5 W |
Dimensions | |
Width | 22.5 mm |
Height | 90 mm |
Depth | 84 mm |
Weight per piece | 150.0 GRM |
Input data | |
Nominal input voltage range | 100 V AC ... 240 V AC |
Input voltage range | 85 V AC ... 264 V AC |
Current consumption | 0.53 A (100 V AC) |
0.28 A (240 V AC) | |
Nominal power consumption | 61.7 VA |
Inrush surge current | < 30 A (typical) |
Mains buffering | typ. 35 ms (120 V AC) |
typ. 135 ms (230 V AC) | |
Input fuse | 2 A (slow-blow, internal) |
Choice of suitable circuit breakers | 6 A ... 16 A (Characteristics B, C, D, K) |
Power factor (cos phi) | 0.47 |
Type of protection | Transient surge protection |
Protective circuit/component | Varistor |
Connection data, onput | |
Connection method | Screw connection |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Stripping length | 8 mm |
Screw thread | M3 |
Ambient conditions | |
Degree of protection | IP20 |
Ambient temperature (operation) | -25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K) |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
Climatic class | 3K3 (in acc. with EN 60721) |
Degree of pollution | 2 |
Approvals | |
|