MOXA ioLogik E2200 Series
Smart Ethernet remote I/O with Click&Go Logic
- Front-end intelligence with patented Click&Go control logic, up to 24 rules
- Active communication with MX-AOPC UA Server
- Saves time and wiring costs with peer-to-peer communications
- Supports SNMP v1/v2c/v3
- Friendly configuration via web browser
- Simplifies I/O management with MXIO library for Windows or Linux
- Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
Moxa’s ioLogik E2200 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2200 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.
PC-Free Alarm and Control Intelligence
This device supports simple yet powerful Click&Go™ technology to configure event-driven reports and alarms delivered over email, TCP/UDP, or SNMP traps, giving you a powerful and effective tool for delivering timestamped status updates in real time.
With built-in Click&Go™ intelligence, this device can be configured for simple outputs paired up with simple input triggers without the need for a PC controller. This allows it to be configured to automatically report I/O events according to conditions specified by the user.
SNMP for Ethernet Device Management
By using SNMP, IT engineers can configure the device to deliver alarms (traps) for specific I/O events, or use it to read or write directly to the I/O registers. For the strongest security, the device features SNMPv3, with authentication and encryption. With Moxa’s SNMP-capable I/O, even IT professionals can easily integrate industrial sensors and servos over an Ethernet backbone, and with its strong network management tools, it is ideal for a wide variety of industrial applications, including environmental monitoring, telecommunications, power production and delivery, and transportation.
Push Technology for Events and Alarms
When used with MX-AOPC UA Server, devices can use active push communications when communicating changes in state and/or events to a SCADA system. Unlike a polling system, when using a push architecture for communications with a SCADA system, messages will only be delivered when changes in state or configured events occur, resulting in higher accuracy and lower amounts of data that need to be transferred.
Specifiations
- Control Logic
- Language
Click&Go
Input / Output Interface
- Analog Input Channels
ioLogik E2240 Series: 8
ioLogik E2242 Series: 4
Analog Output Channels
ioLogik E2240 Series: 2
Configurable DIO Channels (by software)
ioLogik E2212 Series: 4
ioLogik E2242 Series: 12
Digital Input Channels
ioLogik E2210 Series: 12
ioLogik E2212 Series: 8
ioLogik E2214 Series: 6
Digital Output Channels
ioLogik E2210/E2212 Series: 8
ioLogik E2260/E2262 Series: 4
Relay Channels
ioLogik E2214 Series: 6
RTD Channels
ioLogik E2260 Series: 6
Thermocouple Channels
ioLogik E2262 Series: 8
Buttons
Reset button
Isolation
3k VDC or 2k Vrms
Rotary Switch
0 to 9
Digital Inputs
- Connector
Screw-fastened Euroblock terminal
Counter Frequency
900 Hz
Digital Filtering Time Interval
Software configurable
Dry Contact
On: short to GND
Off: open
I/O Mode
DI or event counter
Points per COM
ioLogik E2210 Series: 12 channels
ioLogik E2212/E2242 Series: 6 channels
ioLogik E2214 Series: 3 channels
Sensor Type
ioLogik E2210 Series: Dry Contact and Wet Contact (NPN)
ioLogik E2212/E2214/E2242 Series: Dry Contact and Wet Contact (NPN or PNP)
Wet Contact (DI to GND)
On: 0 to 3 VDC
Off: 10 to 30 VDC
Digital Outputs
- Connector
Screw-fastened Euroblock terminal
Current Rating
200 mA per channel
I/O Mode
DO or pulse output
I/O Type
Sink
Over-Current Protection
0.65 A per channel @ 25°C
Over-Temperature Shutdown
175°C (min.)
Over-Voltage Protection
45 VDC (typical)
Pulse Output Frequency
1 kHz
DIO Output Leakage Current
4.0 mA @ 24 VDC
Relays
- Connector
Screw-fastened Euroblock terminal
Contact Current Rating
Inductive load: 2 A @ 30 VDC, 250 VAC, 110 VAC
Resistive load: 5 A @ 30 VDC, 250 VAC, 110 VAC
Contact Resistance
100 milli-ohms (max.)
Electrical Endurance
100,000 operations @ 5 A resistive load
Mechanical Endurance
1,000,000 operations
Minimum Permitted Load
1 A @ 5 VDC
Pulse Output Frequency
0.3 Hz at rated load
Type
Form A (N.O.) power relay
I/O Mode
Relay or pulse output
Note Ambient humidity must be non-condensing and remain between 5 and 95%.
The relays may malfunction when operating in high condensation environments below 0°C.
Analog Inputs
- Accuracy
ioLogik E2240/E2242:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
ioLogik E2240-T/E2242-T:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -40 to 75°C
Connector
Screw-fastened Euroblock terminal
I/O Mode
Voltage/Current
I/O Type
Differential
Input Impedance
ioLogik E2240 Series: 900 kilo-ohms (min.)
ioLogik E2242 Series: 200 kilo-ohms (min.)
Input Range
ioLogik E2240 Series: ±150 mV, ±500 mV, ±5 V, ±10 V, 0 to 20 mA, 4 to 20 mA
ioLogik E2242 Series: ±150 mV, 0 to 150 mV, ±500 mV, 0 to 500 mV, ±5 V, 0 to 5 V, ±10 V, 0 to 10 V, 0 to 20 mA, 4 to 20 mA
Resolution
16 bits
Sampling Rate
ioLogik E2240 Series:
All Channels: 10 samples/sec for voltage; 6 samples/sec for current
Per Channel: 1.25 samples/sec for voltage; 0.75 samples/sec for current
Single channel: 1.25 samples/sec for voltage; 0.75 samples/sec for current
ioLogik E2242 Series:
All channels: 32 samples/sec
Per channel: 8 samples/sec
Single channel: 100 samples/sec
Built-in Resistor for Current Input
120 ohms
Over-Voltage Protection
-25 to +30 VDC (power on)
-35 to +35 VDC (power off)
Analog Outputs
- Accuracy
ioLogik E2240:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
ioLogik E2240-T:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -40 to 75°C
Output Range
0 to 10 VDC
4 to 20 mA
Resolution
12-bit
Load (Current Mode)
Internal power: 250 ohms (max.)
RTDs
- Accuracy
ioLogik E2260:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
ioLogik E2260-T:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -40 to 75°C
Connector
Screw-fastened Euroblock terminal
Input Connection
2- or 3-wire
Input Impedance
625 kilo-ohms (min.)
Sensor Type
JPT100, JPT200, JPT500 (-200 to 640°C)
JPT1000 (-200 to 350°C)
NI100, NI200, NI500 (-60 to 250°C)
NI1000 (-60 to 150°C)
NI120 (-80 to 260°C)
PT1000 (-200 to 350°C)
PT50, PT100, PT200, PT500 (-200 to 850°C)
Resistance of 310, 620, 1250, and 2200 ohms
Resolution
0.1°C or 0.1 ohms
Sampling Rate
All channels: 12 samples/sec
Per channel: 2 samples/sec
Thermocouples
- Millivolt Accuracy
ioLogik E2262:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
ioLogik E2262-T:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 to 60°C
±0.5% FSR @ -40 to 75°C
TC Accuracy
Types J, T, E, S, B: ±5°C
Types K, R, N: ±8°C
CJC Accuracy
±0.5°C @ 25°C
±1.5°C @ -40 to 75°C
Connector
Screw-fastened Euroblock terminal
Input Impedance
1 mega-ohms (min.)
Millivolt Type
±19.532 mV
±39.062 mV
±78.126 mV
Fault and over-voltage protection: -35 to +35 VDC (power off); -25 to +30 VDC (power on)
Resolution
16 bits
Sampling Rate
All channels: 12 samples/sec
Per channel: 1.5 samples/sec
Sensor Type
J, K, T, E, R, S, B, N
LED Interface
- LED Indicators
PWR, RDY, Serial, I/O Status
Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector)
1
Magnetic Isolation Protection
1.5 kV (built-in)
Ethernet Software Features
- Configuration Options
Web Console (HTTP)
Windows Utility (ioAdmin)
Industrial Protocols CGI commands
Modbus TCP Server (Slave)
Moxa AOPC (Active Tag)
MXIO Library
SNMPv1 Trap
SNMPv1/v2c/v3
Management
BOOTP
IPv4
SMTP
DHCP Client
HTTP
TCP/IP
MIB
Device Settings MIB
Time Management
SNTP
Modbus TCP
- Functions Supported
1, 2, 3, 4, 5, 6, 15, 16
Mode
Server
Serial Interface
- Connector
Terminal block
Serial Standards
RS-485
No. of Ports
1
Baudrate
1,200 bps to 115.2 kbps
Parity
None
Data Bits
8
Stop Bits
1
Flow Control
None
Serial Signals
- RS-485-2w
Data+, Data-, GND
Serial Software Features
- Industrial Protocols
Modbus RTU Server (Client)
Power Parameters
- Power Connector
Screw-fastened Euroblock terminal
No. of Power Inputs
1
Input Voltage
12 to 36 VDC
Power Consumption
ioLogik E2210 Series: 202 mA @ 24 VDC
ioLogik E2212 Series: 136 mA @ 24 VDC
ioLogik E2214 Series: 170 mA @ 24 VDC
ioLogik E2240 Series: 198 mA @ 24 VDC
ioLogik E2242 Series: 178 mA @ 24 VDC
ioLogik E2260 Series: 95 mA @ 24 VDC
ioLogik E2262 Series: 160 mA @ 24 VDC
Physical Characteristics
- Dimensions
115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weight
250 g (0.55 lb)
Installation
DIN-rail mounting
Wall mounting
Wiring
I/O cable, 16 to 26 AWG
Power cable, 16 to 26 AWG
Housing
Plastic
Environmental Limits
- Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Altitude
2000 m
Please contact us if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications
- Freefall
IEC 60068-2-32
EMC
EN 61000-6-2/-6-4
Safety
UL 508
EMI
CISPR 32, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
Shock
IEC 60068-2-27
Vibration
IEC 60068-2-6
Declaration
- Green Product
RoHS, CRoHS, WEEE
MTBF
- Time
ioLogik E2210 Series: 213,673 hrs
ioLogik E2212 Series: 217,722 hrs
ioLogik E2214 Series: 307,329 hrs
ioLogik E2240 Series: 155,941 hrs
ioLogik E2242 Series: 204,391 hrs
ioLogik E2260 Series: 327,282 hrs
ioLogik E2262 Series: 341,063 hrs
Standards
Telcordia SR332
Ordering Information
Input/OutputInterface | DigitalInputSensorType | AnalogInputRange | OperatingTemp. |
ioLogikE2210 | |||
12 x DI, 8 x DO | Wet Contact(NPN),DryContact | - | -10 to 60°C |
ioLogikE2210-T | |||
12 x DI, 8 x DO | Wet Contact(NPN),DryContact | - | -40 to 75°C |
ioLogikE2212 | |||
8 x DI, 4 x DIO, 8 x DO | Wet Contact(NPNor PNP),Dry Contact | - | -10 to 60°C |
ioLogikE2212-T | |||
8 x DI, 4 x DIO, 8 x DO | Wet Contact(NPNor PNP),Dry Contact | - | -40 to 75°C |
ioLogikE2214 | |||
6 x DI, 6 x Relay | Wet Contact(NPNor PNP),Dry Contact | - | -10 to 60°C |
ioLogikE2214-T | |||
6 x DI, 6 x Relay | Wet Contact(NPNor PNP),Dry Contact | - | -40 to 75°C |
ioLogikE2240 | |||
8 x AI, 2 x AO | - | ±150 mV, ±500 mV, ±5 V, ±10V, 0-20 mA, 4-20 mA | -10 to 60°C |
ioLogikE2240-T | |||
8 x AI, 2 x AO | - | ±150 mV, ±500 mV, ±5 V, ±10V, 0-20 mA, 4-20 mA | -40 to 75°C |
ioLogikE2242 | |||
12 x DIO, 4 x AI | Wet Contact(NPNor PNP),Dry Contact | ±150 mV, 0-150mV, ±500mV, 0-500mV, ±5 V, 0-5 V,±10 V, 0-10 V, 0-20 mA, 4-20mA | -10 to 60°C |
ioLogikE2242-T | |||
12 x DIO, 4 x AI | Wet Contact(NPNor PNP),Dry Contact | ±150 mV, 0-150mV, ±500mV, 0-500mV, ±5 V, 0-5 V,±10 V, 0-10 V, 0-20 mA, 4-20mA | -40 to 75°C |
ioLogikE2260 | |||
4 x DO, 6 x RTD | - | - | -10 to 60°C |
ioLogikE2260-T | |||
4 x DO, 6 x RTD | - | - | -40 to 75°C |
ioLogikE2262 | |||
4 x DO, 8 x TC | - | - | -10 to 60°C |
ioLogikE2262-T | |||
4 x DO, 8 x TC | - | - | -40 to 75°C |
Kunden, die diesen Artikel gesehen haben, sahen auch