MOXA AIG-100 Series
2-port Modbus RTU/ASCII/TCP to MQTT/Azure/AWS cloud-ready gateways
- Supports generic MQTT client
- Supports MQTT connection with built-in device SDKs for Azure/AWS cloud
- Supports Modbus RTU/ASCII/TCP master/client
- Supports Modbus TCP server
- Built-in network traffic monitoring and diagnostic tool for easy troubleshooting
- Supports data buffering using store and forward and datalogger
- Seamless integration with Moxa ioLogik /UPort devices to easily extend I/O and serial interfaces
- Built-in data processing function to eliminate programming efforts
- -40 to 70°C operating temperature range
- LTE Cat.1 US, EU, and APAC models available
The AIG-100 Series gateways are entry-level IIoT gateways that connect Modbus RTU/ASCII/TCP devices to cloud platforms and applications such as Azure, AWS, and MQTT. The AIG-100 as a Modbus master can integrate existing Modbus devices with cloud platforms, effortlessly collecting and transmitting data to the Azure and AWS clouds. Moreover, the gateways also support the Modbus TCP slave mode, enabling simultaneous transmission of data to a cloud platform and local SCADA system.
Effortless Extension of I/O and Serial Interfaces
As the number of field sites increases, additional I/O or serial interfaces are required to connect devices, such as sensors, meters, and inverters, for collecting and processing the large amount of data that is generated. A typical approach is to install remote I/O and device servers to extend the interfaces, but the configuration settings required can be a nightmare for most users. To provide an extremely simple configuration process for interface extension, AIG-100 gateways have better integration and come with an intuitive wizard that can configure Moxa ioLogiks and UPorts with just a few clicks.
Built-in Ready-to-use Data Preprocessing Functions, No Coding Required
Energy Management Systems mainly collect energy data such as average power generation and energy efficiency. This data is then used to display on-site conditions, observe the energy trend, and optimize energy usage. Most edge systems require additional programming to process the data required by energy management system. The AIG-100 can preprocess the edge data and directly send meaningful data to the energy management systems. The intuitive UI enables easy configuration of the IIoT gateway settings to collect and process data.
Secure Remote Access Reduces Maintenance Costs
The AIG-100 comes with powerful troubleshooting tools to diagnose issues with protocol statuses and capture and analyze traffic packets, enabling engineers to remotely identify the root cause of issues and quickly bring the operation back to normal. The tools also provide secure remote access to the AIG-100 to enable the maintenance engineers to directly access it, saving a lot of time and effort and reducing system downtime in energy management systems.
Specifications
Package Contents
Ordering Information
Accessories (sold separately)
- Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector)
2, Auto MDI/MDI-X connection
Magnetic Isolation Protection
1.5 kV (built-in)
Ethernet Software Features
- Industrial Protocols
Modbus TCP Client (Master) / Server (Slave)
Generic MQTT
Azure IoT Device
AWS IoT Core
Configuration Options
Web Console (HTTP/HTTPS)
Time Management
NTP Client
GPS
Serial Interface
- No. of Ports
2
Connector
DB9 male
Serial Standards
RS-232/422/485
Baudrate
300 bps to 921.6 kbps
Data Bits
7, 8
Parity
None, Even, Odd, Space, Mark
Stop Bits
1, 2
Flow Control
RTS/CTS
Serial Signals
- RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422
Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w
Data+, Data-, GND
RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND
Cellular Interface
- Cellular Standards
LTE Cat. 1
Cellular Antenna Connectors
SMA x 2
SIM Format
Nano SIM
No. of SIMs
2
GPS Antenna Connectors
SMA x 1
Band Options
US Model:
LTE Bands: Band 2 (1900 MHz) / Band 4 (1700 MHz) / Band 5 (850 MHz) / Band 12 (700 MHz) / Band 13 (700 MHz) / Band 14 (700 MHz) / Band 66 (1700 MHz) / Band 71 (600 MHz)
UMTS Bands: 2 (1900 MHz) / Band 4 (1700 MHz) / Band 5 (850 MHz)
Carrier Approval: Verizon, AT&T
EU Model:
LTE Bands: Band 1 (2100 MHz) / Band 3 (1800 MHz) / Band 7 (2600 MHz) / Band 8 (900 MHz) / Band 20 (800 MHz) / Band 28 (700 MHz)
UMTS Bands: Band 1 (2100 MHz) / Band 3 (1800 MHz) Band 8 (900 MHz)
AP Model:
LTE Bands: Band 1 (2100 MHz) / Band 3 (1800 MHz) / Band 5 (850 MHz) / Band 8 (900 MHz) / Band 28 (700 MHz)
UMTS Bands: Band 1 (2100 MHz) / Band 5 (850 MHz) / Band 8 (900 MHz)
Serial Software Features
- Industrial Protocols Modbus
RTU/ASCII Master
Modbus RTU/ASCII
- Mode
Master
Functions Supported
1, 2, 3, 4, 5, 6, 15, 16, 23
Max. No. of Commands
256 per port
Modbus TCP
- Mode
Server (Slave)
Client (Master)
Functions Supported
1, 2, 3, 4, 5, 6, 15, 16, 23
Max. No. of Client Connections
4
Max. No. of Server Connections
64
Max. No. of Commands
1500
Generic MQTT Client
- Versions Supported
v3.1.1
v3.1
QoS Levels
0, 1, 2
Authentication Methods
Username and password
Secure Transmission
TLS 1.0
TLS 1.1
TLS 1.2
Native Capabilities
Keep Alive
Retain Message
Clean Session
Will and Testament
Moxa Functions
Store and Forward
Custom Payload
Remote API Invocation
Azure IoT Device
- Connection Protocols Supported
MQTT
MQTT over WebSockets
AMQP
AMQP over WebSockets
Authentication Methods
Symmetric Key
X.509 Certificate
Azure Direct Methods
Reboot
Software Upgrade
Remote API Invocation
Moxa Functions
Store and Forward
Custom Payload
AWS IoT Core
- QoS Levels
0,1
Authentication Methods
X.509 Certificate
Private Key
Trusted Root CA
Native Capabilities
Keep Alive
Moxa Functions
Store and Forward
Custom Payload
Commands Invokable Via Jobs
Reboot
Software Upgrade
Remote API Invocation
Memory
- microSD Slot
Up to 32 GB (SD 2.0 compatible)
Max. No. of Tags Supported: 1500
Power Parameters
- Input Voltage
9 to 36 VDC
Power Connector
Screw-fastened Euroblock terminal
Physical Characteristics
- Dimensions
128.5 x 89.1 x 41 mm (5.06 x 3.51 x 1.61 in)
Housing
Metal
Installation
DIN-rail mounting
Wall mounting (with optional kit)
Weight
AIG-101-T: 492 g (1.08 lb)
AIG-101-T-AP/EU/US: 512 g (1.13 lb)
Environmental Limits
- Ambient Relative Humidity
5 to 95% (non-condensing)
Operating Temperature
-40 to 70°C (-40 to 158°F)
Storage Temperature (package included)
-40 to 85°C (-40 to 185°F)
Standards and Certifications
- EMC
EN 55032/35
EMI
CISPR 32, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
Safety
IEC 62368-1
UL 62368-1
EN 62368-1
Shock
IEC 60068-2-27
Vibration
IEC 60068-2-64
5 Grms @ 5 to 500 Hz, random wave, 1 hr per axis (without USB devices attached)
Cellular Standards
EN 303 413 (GPS)
EN 301 908-1 (WCDMA/LTE)
EN 301 908-2/-13 (WCDMA/LTE)
EN 301 489-1/-19
EN 301 489-1/-52
EN 62311
Radio Frequency
FCC
PTCRB
RCM
Carrier Approvals
Verizon
AT&T
Note: Approval pending from AT&T.
Green Product
RoHS, CRoHS, WEEE
MTBF
- Time
566,458 hrs
Standards
Telcordia SR332
Package Contents
- Device
1 x AIG-100 Series gateway
Cable
1 x terminal block to power jack converter
Installation Kit
1 x DIN-rail kit
Documentation
1 x quick installation guide
1 x warranty card
Ordering Information
Model Name | LTE | Band |
---|---|---|
AIG-101-T | - | - |
AIG-101-T-AP | Cat. 1 | AP |
AIG-101-T-EU | Cat. 1 | EU |
AIG-101-T-US | Cat. 1 | US |
Accessories (sold separately)
Power Adapters | |
PWR-12150-AU-SA-T | Locking barrel plug, 12 VDC, 1.5 A, 100 to 240 VAC, AU plug, -40 to 75°C operating temperature |
PWR-12150-CN-SA-T | Locking barrel plug, 12 VDC, 1.5 A, 100 to 240 VAC, CN plug, -40 to 75°C operating temperature |
PWR-12150-EU-SA-T | Locking barrel plug, 12 VDC, 1.5 A, 100 to 240 VAC, EU plug, -40 to 75°C operating temperature |
PWR-12150-UK-SA-T | Locking barrel plug, 12 VDC, 1.5 A, 100 to 240 VAC, UK plug, -40 to 75°C operating temperature |
PWR-12150-USJP-SA-T | Locking barrel plug, 12 VDC 1.5 A, 100 to 240 VAC, US/JP plug, -40 to 75°C operating temperature |
Antennas | |
ANT-LTE-ASM-02 | GPRS/EDGE/UMTS/HSPA/LTE, 2 dBi, omnidirectional rubber-duck antenna |
ANT-LTEUS-ASM-01 | GSM/GPRS/EDGE/UMTS/HSPA/LTE, 1 dBi, omnidirectional rubber-duck antenna |
Kunden, die diesen Artikel gesehen haben, sahen auch