MOXA NPort 5600-8-DT Lite

Mit NPort® 5600-8-DTL Geräteserver können Sie einfach und transparent bis zu 8 serielle Geräte an ein Ethernet-Netzwerk anschließen, so dass Sie Ihre bestehenden seriellen Geräte mit einfacher Konfiguration vernetzen können. Sie können sowohl das Management Ihrer seriellen Geräte zentralisieren als auch Management-Hostrechner über das Netzwerk verteilen. Da die NPort® 5600-8-DTL Geräteserver einen kleineren Formfaktor als unsere 19-Zoll-Modelle haben, sind sie hervorragend für Anwendungen geeignet, die zusätzliche serielle Anschlüsse benötigen und für die keine Befestigungsschienen zur Verfügung stehen.

Convenient Design for RS-485 Applications

The NPort® 5650-8-DTL device servers support selectable 1 KΩ and 150 KΩ pull high/low resistors and a 120 Ω terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort® 5600-8-DTL device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.

LED Indicators to Ease Your Maintenance Tasks

The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort® 5600’s LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.


Ethernet Interface

Number of Ports
1

Speed
10/100 Mbps, auto MDI/MDIX

Connector
8-pin RJ45

Magnetic Isolation Protection
1.5 kV built-in


Serial Interface

Number of Ports
8

Serial Standards
NPort 5610-8-DTL: RS-232
NPort 5650-8-DTL/5650I-8-DTL: RS-232/422/485

Connector
DB9 male

Serial Line Protection
15 kV ESD protection for all signals
2 kV isolation protection (NPort 5650I-8-DTL only)

RS-485 Data Direction Control
ADDC® (automatic data direction control)

Pull High/Low Resistor for RS-485
1 kΩ, 150 kΩ

Terminator for RS-485
120 Ω


Serial Communication Parameters

Data Bits
5, 6, 7, 8

Stop Bits
1, 1.5, 2

Parity
None, Even, Odd, Space, Mark

Flow Control
DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF

Baudrate
50 bps to 921.6 kbps


Serial Signals

RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422
Tx+, Tx-, Rx+, Rx-, GND

RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND

RS-485-2w
Data+, Data-, GND


Software

Network Protocols
ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, Rtelnet, ARP, RFC2217

Configuration Options
Web Console, Telnet Console, Serial Console, Windows Utility

Windows Real COM Drivers
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded

Fixed TTY Drivers
SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X

Linux Real TTY Drivers
Linux 2.4.x, 2.6.x, 3.x


Physical Characteristics

Housing
Metal

Weight
NPort 5610-8-DTL: 1760 g
NPort 5650-8-DTL: 1770 g
NPort 5650I-8-DTL: 1850 g

Dimensions
Without ears: 197 x 44 x 125 mm (7.76 x 1.73 x 4.92 in)
With ears: 229 x 46 x 125 mm (9.01 x 1.81 x 4.92 in)
With DIN-Rail kit on bottom panel: 197 x 53 x 125 mm (7.76 x 2.09 x 4.92 in)


Environmental Limits

Operating Temperature
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature
-40 to 75°C (-40 to 167°F)

Ambient Relative Humidity
5 to 95% (non-condensing)

Altitude
Up to 2000 m

Note Please contact us if you require products guaranteed to function properly at higher altitudes.


Power Requirements

Input Voltage
12 to 48 VDC

Power Consumption
NPort 5610-8-DTL:
340 mA @ 12 V, 180 mA @ 24 V, 110 mA @ 48 V
NPort 5650-8-DTL:
470 mA @ 12 V, 250 mA @ 24 V, 140 mA @ 48 V
NPort 5650I-8-DTL:
740 mA @ 12 V, 370 mA @ 24 V, 220 mA @ 48 V


Standards and Certifications

Safety
UL 60950-1, EN 60950-1

EMC
CE, FCC

EMI
EN 55022 Class A, FCC Part 15 Subpart B Class A

EMS
EN 55024

Reliability

Alert Tools
Built-in buzzer and RTC (real-time clock)

Automatic Reboot Trigger
Built-in WDT (watchdog timer)



Ordering Information

Available Modules
NPort 5610-8-DTL	8-port RS-232 desktop device server with DB9 male connectors, 0 to 60°C operating temperature
NPort 5650-8-DTL	8-port RS-232/422/485 desktop device server with DB9 male connectors, 0 to 60°C operating temperature
NPort 5650I-8-DTL	8-port RS-232/422/485 desktop device server with DB9 male connectors and 2 KV isolation, 0 to 60°C operating temperature
NPort 5610-8-DTL-T	8-port RS-232 desktop device server with DB9 male connectors, -40 to 75°C operating temperature
NPort 5650-8-DTL-T	8-port RS-232/422/485 desktop device server with DB9 male connectors, -40 to 75°C operating temperature
NPort 5650I-8-DTL-T	8-port RS-232/422/485 desktop device server with DB9 male connectors and 2 KV isolation, -40 to 75°C operating temperature