PERLE IOLAN SDS W

SPHINX in Europa
AT
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgruppen > Wireless > PERLE IOLAN SDS W

PERLE IOLAN SDS W

Serial Device Servers Wireless LAN Serial to Ethernet

PERLE IOLAN SDS W
4438_23912.png
4438_23913.jpg
4438_23914.jpg
4438_23915.jpg
4438_23916.jpg
  • EigenschaftenEigenschaften
  • BeschreibungBeschreibung
  • Weitere InformationenWeitere Informationen
  • PDFPDF
  • Hochleistungs-WLAN ( Wi-Fi ® ) : Dual-Band-Funk unterstützt IEEE 802.11 a,b,g,n
  • WLAN-Geschwindigkeiten von bis zu 150Mbps
  • 1, 2 oder 4 per Software wählbare RS232/422/485 serielle Schnittstellen
  • Hochgeschwindigkeits-Gigabit-Ethernet ( 10/100/1000 Base-T )
  • Verbesserte Sicherheitsfunktionen für Datenverschlüsselung, Benutzerauthentifizierung & Eventmanagement
  • Drahtlose Infrastruktur & Peer-to-Peer-Konnektivität Modus
Für sichere serielle Ethernet-Konnektivität mit hoher Geschwindigkeit über drahtlose LAN-Anwendungen ist der IOLAN SDS W Wireless Device Server das fortschrittlichste Produkt auf dem Markt. Der IOLAN SDS W liefert nicht nur hohe Leistungen bei kompakter Größe, sondern unterstützt auch ein breites Spektrum an Hochleistungs-WLAN-Technologie, umfassender Sicherheit, Flexibilität und IPv6-Technologie der nächsten Generation. Dadurch ist er ideal für Anwendungen, die ein entferntes serielles Device-/Konsolenmanagement, entfernte Datenerfassung oder Überwachung erfordern.

Vorteile der IOLAN SDS Wireless Modelle:

  • Unterstützen ein breites Spektrum an WLAN-Technologien: IEEE 802.11 a,b,g,n bei 2,4Ghz/5Ghz
  • Schnelles WLAN - Geschwindigkeiten von bis zu 150Mbps
  • Hochgeschwindigkeits-Gigabit-Ethernet 1000base-T Schnittstelle einschließlich Unterstützung für 100base-TX und 10base-T
  • Bietet als drahtloser Client-Proxy eine drahtlose Konnektivität auf zentrale Zugriffspunkte für serielle und Ethernet-Geräte
  • Kann über WLAN eine direkte seriell zu seriell Peer-Verbindung bereitstellen
  • Software Access Point ( SoftAP ) für bis zu 6 drahtlose Clients.
  • Die schnelle wireless Roaming-Funktion ist ideal für mobile Anwendungen, bei denen der IOLAN transparent zwischen APs (Access Points) mit demselben ESS (Extended Service Set) roamen kann
  • Redundante doppelte Netzeingänge (Barrel- und Anschlussblock)
  • TrueSerial™-Paket-Technologie – Authentischste serielle Verbindung über Ethernet stellt Integrität serieller Protokolle sicher
  • Indikatoren für Netzwerk und Serielle-Schnittstellen für leichte Fehlersuche
  • Plug & Play Installations-Funktion beseitigt Konfiguration Mühe aller IOLAN auf Ihrem IP Netz
  • TruePort – COM/™Y-Redirector von Perle für serielle Anwendungen, der unter Windows, Vista, Linux, Solaris, SCO und Unix eingesetzt werden kann
  • IP Unterstützung (IPv6) der nächsten Generation, Investitionsschutz und Netzwerk Kompatibilität
  • Solides Stahl Gehäuse für Desktop, Wand- oder DIN-Montage
  • Java-freier Browserzugriff auf serielle Remote-Konsolenports über Telnet und SSH
  • Ping-Watchdogsensoren ermöglichen dem Kunden das Aus- und Einschalten von Geräten mit angeschlossenen RPS-Power-Switches von Perle, falls Netzwerkeinrichtungen nicht mehr reagieren.
  • TrueSerial® bietet die authentischste serielle Verbindung über Ethernet


Sichere Seriell zu Ethernet Konnektivität

IOLAN SDS Wireless Device Server ermöglichen es Systemadministratoren, über ein IP-Netzwerk im Fernzugriff sicher auf Konsolenports von Einrichtungen wie Nebenstellenanlagen, Servern, Routern, Netzwerkspeichermedien und Sicherheitsanwendungen zuzugreifen. Sensible Daten wie Informationen zum Kreditkarteninhaber werden durch Standardverschlüsselungsmethoden wie Secure Shell (SSH) und Secure Sockets Layer (SSL) geschützt. Dank Mechanismen wie RADIUS, TACACS+, LDAP, Kerberos, NIS und RSA Security SecurID Tokens könne nur authorisierte Nutzer auf die Server zugreifen.

Durch den Einsatz von modernen Verschlüsselungs-Technologien, schützt der IOLAN sensible und vertrauliche Daten (z.B. von einem Kreditkarten-Lesegerät) während der Übertragung über das offene Internet oder das Intranet. Durch die Implementierung der gängigen Verschlüsselöungs-Standards wie AES, 3DES, RC4, RC2 ud CAST128 ist die reibungslose Kommunikation mit anderen Geräten garantiert.

Der IPSec-Standard gilt als sicherste Methode für die Kommunikation mit entfernten privaten Netzen ber das Internet und ermöglicht eine robuste Authentifizierung und Verschlüsselung von IP-Paketen auf der Vermittlungsschicht des OSI-Modells. Als Standard ist er aufgrund seiner Flexibilität und der Fähigkeit, den Einsatz der richtigen Lösung für eine bestimmte Anwendung zu ermöglichen, ideal für die Interoperation von Systemen mehrerer Anbieter in einem Netzwerk.

IOLAN-Plug-ins

Mit der Inbetriebnahme eines Perle Device Server können Sie sicher sein, dass Ihre Geräte, welche durch einen seriellen COM-Port mit Ihrer Applikation verbunden sind, so reibungslos weiterlaufen, als wären sie direkt verbunden. Falls der unwahrscheinliche Fall eintreten sollte, dass der Device Server nicht sofort “out of the box” diese Verbindung ermöglicht, beantragen Sie bitte sofort eine kostenlose Beratung mit einem unserer Ingenieure – Perle wird Ihre Applikation zum Laufen bringen.

IOLAN Device Server von Perle welche dem Kunden spezielle “Device Plug-ins” zur Verfügung stellt. Diese “Device Plug-ins” sorgen für die erfolgreiche Vernetzung der Geräte, wo andere Lösungen bislang versagt haben. Beantragen Sie eine kostenlose Beratung von einem unserer Ingenieure.

Fortschrittliche IP-Technologie

Der IPv6 Standard findet in der Industrie immer größere Verbreitung. Die IOLAN Seriell zu Ethernet Device Server-Reihe von Perle bietet dank der vollen Konformität zum IPv6-Standard Firmenkunden unübertroffenen Investitionsschutz.

Der Bedarf für IPv6 (welches vom Adress-Schema mit IPv4 kompatibel ist) wird weitgehend durch das Wachstum von IP-Addressen getrieben. Mit der Integration und dem Rollout von fortgeschrittlichen Mobilfunknetzen, wird eine robuste Methode benötigt, um eine schnelle Inbetriebnahme einer großen Anzahl von neuen IP-adressierbaren Geräten zu bewältigen. Das US-Verteidigungsministerium spezifiziert, daß alle zu beschaffenden EDV-Investitionen IPv6 konform sein müssen. Zudem bieten alle gängigen Betriebssysteme wie Linux, UNIX, Windows Solaris und auch Router bereits volle IPv6 Unterstützung.

Daher ist es wichtig, daß Endkunden und System-Integratoren nur Geräte einkaufen, die IPv6 unterstützen. Unsere IOLAN-Reihe mit eingebauter IPv6 Unterstützung ist daher die beste Wahl um serielle Geräte an das Ethernet anzubinden.

Flexible und zuverlässige Anbindungen an das Ethernet

IOLAN SDS W Device Server stellen sich als ideal dar für den Anschluss auf serieller Technik basierender Einrichtungen wie COM-Ports, UDP- oder TCP-Sockets an Anwendungen im Fernzugriff. Perle’s Umleitungstreiber Software TruePort bietet fest stehende ™Y- oder COM-Ports für Anwendungen auf serieller Basis, sodass die Kommunikation zu entfernten, an Geräteserver von Perle angeschlossene Anwendungen entweder verschlüsselt oder im reinen Textmodus, erfolgen kann. Sie können ferner serielle Daten zwischen den Geräten über ein IP-Netzwerk tunneln. Perles Software für das Geräte-Management bietet die besser zentralisierte Steuerung einer Vielzahl von Einheiten, sodass eine maximale tatsächliche Nutzungsdauer Ihres remoten Equipments gegeben ist.

Standardmässig werden alle Produkte der IOLAN SDS W Baureihe mit einer 15Kv-ESD-Überspannungssicherung ausgeliefert, die zusätzlichen Schutz vor elektrostatischen Entladungen und Spannungsspitzen bietet.

Lebenslange Garantie

Die Perle IOLAN Seriell zu Ethernet Device Server werden mit dem branchenweit besten Service und Support versehen, wozu auch Perles einzigartige Garantie auf Lebenszeit zählt. Seit 1976 versorgt Perle seine Kunden mit Netzwerkprodukten, die höchsten Ansprüchen an Leistung, Flexibilität und Qualität genügen.


Topology Support

    Serial to WLAN
    Serial to ethernet
    Ethernet to WLAN
    Infrastructure ( to Access Point ) and secure peer to peer using SoftAP ( vs legacy “Ad-Hoc” )


Serial Port Access

    Connect directly using Telnet / SSH by port and IP address
    Connect with EasyPort menu by Telnet / SSH
    Use an internet browser to access with H™P or secure https via EasyPort Web menu
    Java-free browser access to remote serial console ports via Telnet and SSH
    Ports can be assigned a specific IP address ( aliasing )
    Multisession capability enables multiple users to access ports simultaneously on 2 and 4 port models
    Multihost access enables multiple hosts/servers to share serial ports


Accessibility

    In-band ( Ethernet ) and out-of-band ( dial-up modem ) support
    Dynamic DNS enables users to find a console server from anywhere on the Internet
    Domain name control through DHCP option 81
    IPV6 and IPV4 addressing support


Availability

    Primary/Backup host functionality enables automatic connections to alternate host(s)


Security

    SSH v1 and v2
    SSL V3.0/TLS V1.0, SSL V2.0
    SSL Server and SSL client mode capability
    SSL Peer authentication
    IPSec VPN : NAT Traversal, ESP authentication protocol
    Encryption: AES (256/192/128), 3DES, DES, Blowfish, CAST128, ARCFOUR(RC4), ARCTWO(RC2)
    Hashing Algorithms: MD5, SHA-1, RIPEMD160, SHA1-96, and MD5-96
    Key exchange: RSA, EDH-RSA, EDH-DSS, ADH
    X.509 Certificate verification: RSA, DSA
    Certificate authority (CA) list
    Wireless LAN : WPA-PSK, WPA2-PSK & Enterprise ( EAP, PEAP, LEAP ), WEP, IEEE 802.11i, IEEE 802.1x supplicant
    Local database
    RADIUS Authentication, Authorization and Accounting
    TACACS+ Authentication, Authorization and Accounting
    LDAP, NIS, Kerberos Authentication
    RSA SecureID-agent or via RADIUS Authentication
    SNMP v3 Authentication and Encryption support
    IP Address filtering
    Disable unused daemons
    Active Directory via LDAP


Terminal Server

    Telnet
    SSH v1 and v2
    Rlogin
    Auto session login
    LPD, RCP printer
    MOTD - Message of the day


Serial machine to Ethernet

    Tunnel raw serial data across Ethernet - clear or encrypted
    Raw serial data over TCP/IP
    Raw serial data over UDP
    Serial data control of packetized data
    Share serial ports with multiple hosts/servers
    Virtual modem simulates a modem connection - assign IP address by AT phone number
    Virtual modem data can be sent over the Ethernet link with or without SSL encryption
    TruePort com/tty redirector for serial based applications on Windows, Linux, Solaris, SCO, HP UX, NCR UNIX and AIX.
    TrueSerial packet technology provides the most authentic serial connections across Ethernet ensuring serial protocol integrity
    RFC 2217 standard for transport of serial data and RS232 control signals
    Customizable or fixed serial baud rates
    Plug-ins allow customer or Perle provided plug-ins for special applications
    Software Development Kit ( SDK ) available
    Serial encapsulation of industrial protocols such as ModBus, DNP3 and IEC-870-5-101
    ModBus TCP gateway enables serial Modbus ASCII/RTU device connection to ModBus TCP
    Data logging will store serial data received when no active TCP session and forward to network peer once session re-established - 32K bytes circular per port


Console Management

    Sun / Oracle Solaris Break Safe
    Local port buffer viewing - 256K bytes per port
    External port buffering via NFS, encrypted NFS and Syslog
    Event notification
    Manage AC power of external equipment using Perle RPS power management products
    Clustering - central console server enables access ports across multiple console servers
    Windows Server 2003/2008 EMS - SAC support GUI access to text-based Special Administrative Console
    Ping watchdog probes enable customers to power cycle equipment with attached Perle RPS power switches in the event of an unresponsive networking gear


Remote Access

    Dial, direct serial
    PPP, PAP/CHAP, SLIP

    H™P tunneling enables firewall-safe access to remote serial devices across the internet

    Automatic DNS Update
    Utilize DHCP Opt 81 to set IOLAN domain name for easy name management and with Dynamic DNS support , users on the Internet can access the device server by name without having to know its IP address. See Automatic DNS update support for details

    IPSEC VPN client/servers
    Microsoft L2TP/IPSEC VPN client ( native to Windows XP)
    Microsoft IPSEC VPN Client ( native to Windows Vista )
    Cisco routers with IPSEC VPN feature set
    Perle IOLAN SDS/STS and SCS models


OA&M ( Operations, Administration and Management )

    WiFi Protected Setup ( WPS )
    SNMP V3 - read and write, Perle MIB
    Syslog
    Perle Device Manager - Windows based utility for large scale deployments
    Configurable default configuration
    Installation Wizard
    Set a Personalized Factory Default for your IOLANs


Protocols

    IPv6, IPv4, TCP/IP, Reverse SSH, SSH, SSL, IPSec/IPv4, IPSec/IPv6, L2TP/IPSec, CIDR, RIPV2/MD5, ARP, RARP, UDP, UDP Multicast, ICMP, BOOTP, DHCP, TFTP, SFTP, SNTP, Telnet, raw, reverse Telnet, LPD, RCP, DNS, Dynamic DNS, WINS, H™P, https, SMTP, SNMPV3, PPP, PAP/CHAP, SLIP, CSLIP, RFC2217, MSCHAP




Hardware Specifications - IOLAN SDS W- 1, 2 and 4 port Wireless LAN Serial Device Servers

IOLAN SDS1 W, SDS2 W   IOLAN SDS4 W
Processor 600Mhz ARM Processor
Memory  
RAM MB 512M 512M
Flash MB 4G 4G
Interface Ports  
Number of Serial Ports 1, 2 ( DB9M ) 4 ( RJ45 )
Serial Port Interface Software selectable EIA232/422/485 Software selectable EIA-232/422/485
Sun / Solaris Sun / Oracle ‘Solaris´ Safe - no "break signal" sent during
power cycle causing costly server re-boots or downtime
Serial Port Speeds 300bps to 230Kbps with customizable baud rate support
Data Bits 5,6,7,8, 9-bit protocol support
Parity Odd, Even, Mark, Space, None
Flow Control Hardware, Software, Both, None
Serial Port Protection 15Kv Electrostatic Discharge Protection ( ESD )
Local Console Port RS232 on Serial Port
Ethernet Network Autosensing 1000-base-T / 100-base TX / 10-base T Auto-MDIX
Software selectable Ethernet speed 1000/100/10
Software selectable Half/Full/Auto duplex
Ethernet Isolation 1.5Kv Magnetic Isolation
Wireless LAN standards IEEE 802.11a
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n
IEEE 802.11i
Wireless Topology Infrastructure ( AP ) and Peer to Peer- (SoftAP) modes
Wireless Radio Dual-Band Radio ; 2.4GHz and 5GHz 20, 40Mhz SISO 2.4-GHz Dual-Band Radio ; 2.4GHz and 5GHz 20, 40Mhz SISO 2.4GHz
Rx Diversity, Maximal Ratio Combining ( MRC )
Dual antenna provides optimal wireless performance, signal reliability, and extended range

  • Rx Diversity on 5GHz band
  • Maximal Ratio Combining - MRC @ 2.4GHz provides 1.4 times extended range
Wireless Data Rates 802.11n: 15, 30, 45, 60, 90, 120, 135, 150 Mbps ( 40Mhz channel @ 400ns Short GI )
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b: 1, 2, 5.5, 11 Mbps
Operational Frequency Range ( MHz ) 2412 to 2484 MHz
4910 to 5825 MHz
Modulation DSSS, CCK, OFDM, BPSK, QPSK, 16-QAM, 64-QAM
Wireless Receiver Sensitivity in dBm
( 2.4Ghz SISO )


802.11b/g ( 20 MHz channel )
1 Mbps: -95.0
2 Mbps: -92.0
5.5 Mbps: -89.2
6 Mbps: -91.0
9 Mbps: -89.0
11 Mbps: -86.3
12 Mbps: -88.0
18 Mbps: -85.5
24 Mbps: -82.5
36 Mbps: -79.0
48 Mbps: -74.0
54 Mbps: -72.7


802.11n ( 20 MHz channel ) @ 400ns GI
7.2 Mbps ( MCS0 ): -89.3
14.4 Mbps ( MCS1 ): -86.5
21.7 Mbps ( MCS2 ): -84.5
28.9 Mbps ( MCS3 ): -81.5
43.3 Mbps ( MCS4 ): -78.0
57.8 Mbps ( MCS5 ): -73.5
65.0 Mbps ( MCS6 ): - 71.5
72.2 Mbps ( MCS7 ): -70.0


802.11n ( 40 MHz channel ) @ 400ns GI
15.0 Mbps ( MCS0 ): -89.3
30.0 Mbps ( MCS1 ): -86.5
45.0 Mbps ( MCS2 ): -84.5
60.0 Mbps ( MCS3 ): -81.5
90.0 Mbps ( MCS4 ): -78.0
120.0 Mbps ( MCS5 ): -73.5
135.0 Mbps ( MCS6 ): - 71.5
150.0 Mbps ( MCS7 ): -70.0


Wireless Transmit Power in dBm
( 2.4Ghz SISO )


( 20 MHz channel )
1 Mbps: 16.0
2 Mbps: 16.0
5.5 Mbps: 16.0
6 Mbps: 16.5
9 Mbps: 16.5
11 Mbps: 16.0
12 Mbps: 16.5
18 Mbps: 16.5
24 Mbps: 16.5
36 Mbps: 15.2
48 Mbps: 14.3
54 Mbps: 13.5
MCS0 : 16.0
MCS1 : 16.0
MCS2 : 16.0
MCS3 : 16.0
MCS4 : 15.2
MCS5 : 14.3
MCS6 : 13.5
MCS7 : 12.6


( 40 MHz channel )
MCS0 : 14.0

MCS7 : 11.8
Wireless Receiver Sensitivity in dBm
( 5Ghz SISO )


802.11a
6 Mbps: -92.5
9 Mbps: -90.5
12 Mbps: -90.0
18 Mbps: -87.5
24 Mbps: -84.5
36 Mbps: -81.0
48 Mbps: -76.5
54 Mbps: -74.6


802.11n ( 20MHz channel ) @ 400ns GI
7.2 Mbps ( MCS0 ): -91.4
14.4 Mbps ( MCS1 ): -88.0
21.7 Mbps ( MCS2 ): -86.0
28.9 Mbps ( MCS3 ): -83.0
43.3 Mbps ( MCS4 ): -79.8
57.8 Mbps ( MCS5 ): -75.5
65.0 Mbps ( MCS6 ): - 74.0
72.2 Mbps ( MCS7 ): -72.4


802.11n ( 40MHz channel ) @ 400ns GI
15.0 Mbps ( MCS0 ): -88.5

150.0 Mbps ( MCS7 ): -69.3
Wireless Transmit Power in dBm
( 5Ghz SISO )


802.11a
6 Mbps: 18.0
9 Mbps: 18.0
12 Mbps: 18.0
18 Mbps: 18.0
24 Mbps: 17.4
36 Mbps: 16.5
48 Mbps: 15.8
54 Mbps: 14.5


802.11n ( HT20 ) @ 400ns GI
7.2 Mbps ( MCS0 ): 18.0
14.4 Mbps ( MCS1 ): 18.0
21.7 Mbps ( MCS2 ): 18.0
28.9 Mbps ( MCS3 ): 18.0
43.3 Mbps ( MCS4 ): 16.5
57.8 Mbps ( MCS5 ): 15.8
65.0 Mbps ( MCS6 ): 14.5
72.2 Mbps ( MCS7 ): 12.0


802.11n ( HT40 ) @ 400ns GI
15.0 Mbps ( MCS0 ): 16.5

150.0 Mbps ( MCS7 ): 12.0
Short Guard Interval
( SGI )
800ns and 400ns ( Short Guard Interval )
Wireless Antenna Single 2.15 dBi, Dipole, SMA connector Dual 2.15 dBi, Dipole, SMA Connectors for Rx diversity/MRC
Wireless Security WEP, WPA-PSK, WPA2-PSK & Enterprise ( EAP, PEAP, LEAP ), 802.11i (includes hardware-accelerated Advanced Encryption Standard [AES] ), 802.1x supplicant
Fast Wireless Roaming Ideal for mobile applications , the IOLAN can transparently roam between APs ( Access Points ) that share the same ESS ( Extended Service Set )
WiFi Protected Setup
( WPS V2 )
A plug and play set up feature where the IOLAN can easily connect to
  • a WPS capable central access point


or

  • SoftAP compliant device supporting WPS
Power  
Power Supply 120 V / 230V AC to 12vDC Wall Power Adaptor included. ( Barrel connector, commercial-grade temperature – 0 to 60C )
2 x Power Supply Selection Use external power 9-30v DC on standard 5.5mm x 9.5mm x 2.1mm barrel socket or 2-pin terminal block
Nominal Input Voltage 12/24v DC
Input Voltage Range 9-30v DC
Typical Power Consumption
@ 24v DC ( Watts )
1 port : 3.96
2 port: 4.23
4.44
Indicators  
LEDs Power/Ready
Network Link
Network Link activity
Serial: Transmit and Receive data per port
Wireless Link
Wireless Strength
Environmental Specifications  
Heat Output
( BTU/HR )
1 port: 13.5
2 port: 14.4
15.1
MTBF ( Hours )* 1 port : 222,675
2 port : 206,430
170,530
Operating Temperature -40° C to 75° C ( -40 F to 167° F )
Storage Temperature -40 C to 85 C (-40 F to 185 F)
Humidity 5 to 95% (non-condensing) for both storage and operation.
Case SECC Zinc plated sheet metal (1 mm)
Ingress Protection Rating IP40
Mounting Wall or Panel mounting, DIN Rail mounting kit optional
Product Weight and Dimensions  
Weight 0.25 kg (0.55 lbs) 0.4 kg (0.88 lbs)
Dimensions 90 x 76 x 24 mm
(3.5 x 3.0 x 0.9 in)
110 x 111 x 24 mm
(4.3 x 4.4 x 0.9 in)
Packaging  
Shipping Dimensions 26 x 17 x7 cm
(10.2 x 6.7 x 2.8 in)
26 x 17 x7 cm
(10.2 x 6.7 x 2.8 in)
Shipping weight 0.55 kg (1.21 lbs) 0.71 kg (1.6 lbs)
Regulatory Approvals  
Emissions FCC Part 15, Subpart B, Class B
CFR47:2003, Chapter 1, Part 15 Subpart B,(USA) Class B
ICES-003, Issue 4, February 2004 (Canada)
EN55022:1998 + A1:2000 + A2:2003 Class A
EN61000-3-2 : 1995, Limits for Harmonic Current Emissions
EN61000-3-3 : 1995, Limits of Voltage Fluctuations and Flicker
Immunity EN55024:1998 + A1:2001 + A2:2003
EN61000-4-2: Electrostatic Discharge
EN61000-4-3: RF Electromagnetic Field Modulated
EN61000-4-4: Fast Transients
EN61000-4-5: Surge
EN61000-4-6: RF Continuous Conducted
EN61000-4-8: Power-Frequency Magnetic Field
EN61000-4-11: Voltage Dips and Voltage Interruptions
Safety IEC 60950-1 : 2005 (2nd Edition) + A1 : 2009 and
EN 60950-1 : 2006 + A11 : 2009
CAN/CSA-C22.2 No. 60950-1-03 and ANSI/UL 60950-1,
First Edition April 1st 2003 (Recognized Component)
Wireless Regulatory Domain
IOLAN SDS W is certified for the following regulatory domains

  • FCC/ICES
  • ETSI
  • TELEC
Users are responsible for verifying approval for use in their individual countries.
Radio Approvals
FCC Part 15.247 Subpart C ( 2.4 Ghz )
FCC Part 15.407 Subpart E ( 5 Ghz )


RSS-210 ( Canada ), RSS-Gen Issue 2 ( Canada ), ICES-003 Issue 4


ETSI EN 301 489-1 (V1.9.2)
ETSI EN 301 489-17 (V2.2.1)
ETSI EN 300 328 (V1.8.1)

ETSI EN 301 893 (V1.7.1)
Frequency Bands
FCC / ICES
2.412 to 2.462 GHz; 11 channels
5.180 to 5.320 GHz; 8 channels
5.500 to 5.700 GHz, 8 channels (excluding 5.600 to 5.640 GHz)
5.745 to 5.825 GHz; 5 channels


ETSI
2.412 to 2.472 GHz; 13 channels
5.180 to 5.320 GHz; 8 channels
5.500 to 5.700 GHz; 8 channels (excluding 5.600 to 5.640 GHz)


MIC ( formally TELEC )
2.412 to 2.472 GHz; 13 channels
4.920 to 4.980 GHz; 4 channels
5.030 to 5.091 GHz; 3 channels
5.180 to 5.240 GHz; 8 channels

5.500 to 5.700 GHz; 11 channels
Other Reach, RoHS and WEEE Compliant
CCATS - G168387
ECCN - 5A992
HTSUS Number: 8471.80.1000
Perle Limted Lifetime Warranty
Serial Connector Pinout  

IOLAN DB9M Socket
 
Direction RS232 RS485 Full Duplex RS485 Half Duplex RS422
1 in DCD - - -
2 in RxD RxD+ - RxD+
3 out TxD TxD- DATA- TxD-
4 out DTR - - -
5 line GND GND GND GND
6 in DSR - - -
7 line RTS TxD+ DATA+ TxD+
8 in CTS RxD- - RxD-
9 line - - - TxD-

IOLAN RJ45 Socket
Direction
 
RS232 RS485 Full Duplex RS485 Half Duplex RS422
1 in DCD - - -
2 out RTS TxD+ DATA+ TxD+
3 in DSR - - -
4 out TxD TxD- DATA- TxD-
5 in RxD RxD+ - RxD+
6 line GND GND GND GND
7 in CTS RxD- - RxD-
8 out DTR - - -


Optional Perle adapters for use with straight thru CAT5 cabling



*Calculation model based on MIL-HDBK-217-FN2 @ 30 °C





Seamless Wireless Roaming  

Serial devices can roam


IOLAN SDS W units installed on mobile devices, such as fork lifts with a serial interface, can maintain a continuous connection to network services that are part of Wireless Access Point infrastructure that shares the same ESS ( Extended Service Set ).

TCP  

Using RAW TCP Sockets over Wireless LAN


A raw TCP socket connection which can be initiated from the serial-Ethernet device or from the remote host/server. This can either be on a point to point or shared basis where a serial device can be shared amongst multiple devices. TCP sessions can be initiated either from the TCP server application or from the Perle IOLAN W serial-Ethernet adapter.

UDP  

Using Raw UDP Sockets over Wireless LAN


For use with UDP based applications, Perle IOLANs can convert serial equipment data for transport across UDP packets either on a point to point basis or shared across multiple devices.

Console Server  

Console Management over Wireless LAN


For access to remote console ports on routers, switches, etc. Perle IOLAN’s enable administrators secure access to these RS232 ports via in-band Reverse Telnet / SSH over wireless LANs.

COM/™Y  

Connect Serial-based Applications over Wireless LAN with a COM/™Y Port Driver


Serial ports can be connected to network servers or workstations running Perle´s TruePort software operating as a virtual COM port. Sessions can be initiated either from the Perle IOLAN or from TruePort.

Serial Tunneling over Wireless  

Serial Tunneling between two Serial Devices over Wireless Peer to Peer


Serial Tunneling enables you to establish a link across Ethernet to a serial port on another IOLAN. Both IOLAN serial ports must be configured for Serial Tunneling. Typically one serial port is configured as a Tunnel Server and the other serial port as a Tunnel Client.





Ordering Information

Available Modules
IOLAN SDS1 W Secure Wireless Device Server
( Terminal Server )
Wireless LAN ( WiFi ) client IEEE 802.11 a,b,g,n @ 2.4Ghz/5Ghz -
1 x DB9M connector, software selectable RS232/422/485 interface,
10/100/1000 Ethernet, advanced data encryption,
user authentication and event management security features included, IPv6,
COM port redirector, 15kv ESD. Commercial-temp AC adapter included
IOLAN SDS2 W Secure Wireless Device Server
( Terminal Server ).
Wireless LAN ( WiFi ) client IEEE 802.11 a,b,g,n @ 2.4Ghz/5Ghz -
2 x DB9M connectors, software selectable RS232/422/485 interface,
10/100/1000 Ethernet, advanced data encryption,
user authentication and event management security features included, IPv6,
COM port redirector, 15kv ESD. Commercial-temp AC adapter included
IOLAN SDS4 W Secure Wireless Device Server
( Terminal Server ).
Wireless LAN ( WiFi ) client IEEE 802.11 a,b,g,n @ 2.4Ghz/5Ghz -
4 x RJ45 connectors, software selectable RS232/422/485 interface,
10/100/1000 Ethernet, advanced data encryption,
user authentication and event management security features included, IPv6,    
COM port redirector, 15kv ESD. Commercial-temp AC adapter included



Kunden, die diesen Artikel gesehen haben, sahen auch
Alle Cookies akzeptieren Ablehnen Konfigurieren

Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr erfahren.